Skip to main content

Burrell Traction Engine, Gears Part 2..... And some other bits.

 Burrell Traction Engine,Gears Part 2.... And some other bits.





The slow gear and brake drum arrangement as delivered, no machining has been carried out, just checking if it will fit on the lathe, and how true the casting is.

Since the fast gear blank won't fit on the milling machine, I've parked that until I can decide how to cut the teeth.


I decided to make a start on the shaft tubes and use the new fixed steady I bought at the Warwick show. This has been slightly modified to raise it to my center height and had a small overhaul and a coat of paint. From memory, I think it was a bargain at around £30.
The 2nd of the shaft tubes this is more awkward as the chucking stub has been ground off flush. This was as delivered from the foundry however for the smaller lathe it's going to be harder to get the first center drilled, and running true. 

More to follow ... 


Labels:

Comments

Post a Comment

Popular posts from this blog

Midlands Model Engineer Show 2024 - Warwick

 Midlands Model Engineer Show 2024 - Warwick This year’s Model Engineers Show 2024 was a huge success! All four days of the show were fantastic with exhibitors and visitors alike enjoying plenty of opportunities to purchase items, learn and explore the very latest in machinery tools and model engineering. The 2 exhibition halls were abuzz with vibrancy, excitement and anticipation. I went with a usual shopping list, and a few parts that I had organised from suppliers to take to the show for me for collection and postage saving opportunity. I ordered an expansion Link and had it water jet cut this being the results after only minimal cleaning up required. I reamed the holes out and basically park this until the rods are done. Back to the show report. There were some fantastic models on display and also the gas turbine demonstrations running outside along with the traction engines and a few helicopters in the main carpark. Below the pictures I took on the day and a few videos of the ...
Post a Comment
Read more
1" Minnie Traction Engine By Stephen Meredith   Background Working Progress (Gears) Front End Parts Following the completion of a small marine steam engine "Trojan Engine", I decided to tackle a larger project. Having visited various shows and the model engineers Exhibition, I decided to buy the Construction book for building the popular 1" scale 'Minnie' traction engine. The initial workshop experience was limited but keen to learn, and research has enabled me to get it this far. A s can be seen, this is basically finished well almost, it steams, and runs well a few tweaks are needed but tweaks don’t make piles of swarf. The intention was to show the engine and run it, at rallies but what I really wanted was a capable engine that could pull an adult or (me) on a field. This engine was, therefore, a stepping stone to be able to tackle the engine I wanted. After research, I bought a set of drawings for the Plastow 3” Bur...
Post a Comment
Read more

Stoke Prior Steam Rally 2025

 Stoke Prior steam rally 2025 📣 Show Report ✅ Strong Attendance – Rain or Shine! The show, as usual, was well attended, and we’re pleased to report that paying numbers held up strongly —despite a soggy Saturday. Fortunately, Sunday brought sunshine all day , which made up for it! A big thank you to everyone who braved the elements. This year’s weather was a definite improvement on last year’s continuous showers—and a far cry from the scorcher we had the year before that (we still remember those sunburns!). 😎 🚜 715 Exhibits on Display! We were welcome a whopping 715 individual exhibits this year, offering a fantastic variety for visitors to enjoy. This included: 25 Miniatures 7 Full-Size Engines 2 Steam Cars A huge number of commercial vehicles , classic cars , motorbikes , military vehicles , and stationary engine displays From the tiniest model to the largest working machine, there was something for everyone to marvel at.  <---This is us on the Su...
Post a Comment
Read more