Skip to main content

My Burrell progress and Welland steam Show 2023 Report

 Welland steam Show 2023 Report.....


Welland Steam Show (Upton-upon-Severn July 28th-30th  2023).


The show as usual was well attended. I'm happy to report the numbers looked better than perhaps some of the traders were expecting. Maybe the cancelled years, due to Covid, have inspired the next generation of Model Engineers. It certainly looked like there was no shortage of money changing hands for tools. 

The show boasted 37 miniatures and 99 full size engines, along with a huge number of commercials, cars, bikes, tanks and military vehicles and displays. This time again, like last year there was the heavy haulage arena, which was fascinating to watch, as long as you could keep the coal ash out of your eyes :-)

 I can imagine the rising fuel costs to move large machines, but this has not stopped them from attending this year. Thank you to all the organisers and engine owners, both big and small another fab year!!

I actually spent quite some time there wandering about, having arrived early by 9am and I stayed until it was too dark to see the car in the car park. As I was leaving the fireworks had just started so it was at least 10pm with an hour drive home ahead.  
Having attended the show now for a number of years, I can say this was up there as one of the best shows I attend.  Looking forward to next year and the usual fantastic weather, despite what Alexa said the forecast was going to be!

My engine has only progressed by some small jobs and putting it back together, The clearances for the crank shaft having being checked, based on comments from Traction talk. It is close to the front spectacle plate, but not overly concerned.


   Until next month stay safe; make swarf; have fun!  Regards Stephen...


Labels:

Comments

Post a Comment

Popular posts from this blog

1" Minnie Traction Engine By Stephen Meredith   Background Working Progress (Gears) Front End Parts Following the completion of a small marine steam engine "Trojan Engine", I decided to tackle a larger project. Having visited various shows and the model engineers Exhibition, I decided to buy the Construction book for building the popular 1" scale 'Minnie' traction engine. The initial workshop experience was limited but keen to learn, and research has enabled me to get it this far. A s can be seen, this is basically finished well almost, it steams, and runs well a few tweaks are needed but tweaks don’t make piles of swarf. The intention was to show the engine and run it, at rallies but what I really wanted was a capable engine that could pull an adult or (me) on a field. This engine was, therefore, a stepping stone to be able to tackle the engine I wanted. After research, I bought a set of drawings for the Plastow 3” Bur...
Post a Comment
Read more

Bridgnorth Mini-Gala Featuring Traction engines.

 Bridgnorth Mini-Gala Featuring Steam Road Miniatures. (Pictures from Saturday 1/11/25)  Bridgnorth Mini Gala: End of Season Steam Inspiration Bridgnorth once again marked the close of the running season with its Miniature Steam Gala , a compact but characterful gathering of miniature road vehicles, steam lorries, and traction engines . The event has become a highlight for enthusiasts, and this year’s display was every bit as enjoyable as before. My attendance was unplanned — much like the previous year — but that seems to be part of the charm. What began as an impromptu visit quickly turned into another opportunity to watch a fine collection of engines in steam. The station car park was once again transformed into a working yard of miniature traction engines, all hissing, chuffing, and radiating warmth against the chill of early November. It’s a real credit to the owners and crews who take the trouble to bring their engines out at this time of year. Keeping steam up in unp...
Post a Comment
Read more

Penultimate Post this year. (2025)

 Penultimate Post this year. Reversing Lever                                                             Regulator Lever < Left reverser working progress hand modelled by me.  Not a huge amount to show for this month, but I did make a solid start on the reversing bracket and lever. I’ve had the metal for this part for well over 12 months, so it’s satisfying to finally see it taking shape. The plan is for it to eventually be mounted on the tender, but for now—once finished—it can sit on the shelf and look decorative. The regulator lever was part started but is now fully completed.  In my next post I’ll try to put together an end-of-year photo, Year-6 round-up: all the current progress assembled or balanced together for a group photo, similar to last year’s. It’s a useful reminder of how far things have come over the ...
Post a Comment
Read more