Skip to main content

Rods and lifting link progress.

Rods and lifting link progress. 


Following another holiday for a week, progress in the workshop has continued but at the normal winter slow pace. A small Jig was started ready for my return, and in an evening I completed one of the lifting rods. (Narrowly missing I'm a celeb on tv , phew! and avoiding the snow). 

The Jig was my own idea and the welding done by my Son, who helped me out here. The scrap metal was in fact the Jig I used for setting the gear mesh, but as it is not longer required, so has been re purposed to this new task.   (It also can be still used for its previous job as well, as the central pin unscrews).
The near completed lifting link, first of two required. Just needs an oil hole drilling. The centre portion was milled out leaving sufficient for the turning of the two ends. 


The rods have also been started to a point and progress stopped to complete the above before the milling machine is swapped from vertical to horizontal.

< Pleased with the results.
A low cost marine grade! shackle in 316 Stainless Steel was purchased from China, and a cut and shut operation carried out, put back together with ordinary silver solder to get the new desired size.
 
Until Next month, stay safe, make swarf and be the best you can be.

Labels:

Comments

Post a Comment

Popular posts from this blog

1" Minnie Traction Engine By Stephen Meredith   Background Working Progress (Gears) Front End Parts Following the completion of a small marine steam engine "Trojan Engine", I decided to tackle a larger project. Having visited various shows and the model engineers Exhibition, I decided to buy the Construction book for building the popular 1" scale 'Minnie' traction engine. The initial workshop experience was limited but keen to learn, and research has enabled me to get it this far. A s can be seen, this is basically finished well almost, it steams, and runs well a few tweaks are needed but tweaks don’t make piles of swarf. The intention was to show the engine and run it, at rallies but what I really wanted was a capable engine that could pull an adult or (me) on a field. This engine was, therefore, a stepping stone to be able to tackle the engine I wanted. After research, I bought a set of drawings for the Plastow 3” Bur...
Post a Comment
Read more

Bridgnorth Mini-Gala Featuring Traction engines.

 Bridgnorth Mini-Gala Featuring Steam Road Miniatures. (Pictures from Saturday 1/11/25)  Bridgnorth Mini Gala: End of Season Steam Inspiration Bridgnorth once again marked the close of the running season with its Miniature Steam Gala , a compact but characterful gathering of miniature road vehicles, steam lorries, and traction engines . The event has become a highlight for enthusiasts, and this year’s display was every bit as enjoyable as before. My attendance was unplanned — much like the previous year — but that seems to be part of the charm. What began as an impromptu visit quickly turned into another opportunity to watch a fine collection of engines in steam. The station car park was once again transformed into a working yard of miniature traction engines, all hissing, chuffing, and radiating warmth against the chill of early November. It’s a real credit to the owners and crews who take the trouble to bring their engines out at this time of year. Keeping steam up in unp...
Post a Comment
Read more

Midlands Model Engineers Exhibition 2023.

  Midlands Model Engineers Exhibition 2023. This year’s Model Engineers Show 2023 was a huge success! All four days of the show were fantastic with exhibitors and visitors alike enjoying plenty of opportunities to purchase items, learn and explore the very latest in machinery tools and model engineering. The 2 exhibition halls were abuzz with vibrancy, excitement and anticipation. I went with a usual shopping list, and a few parts that I had organised from suppliers to take to the show for me for collection and postage saving opportunity. Centre piece if the show for me, a huge amount of work in this engine and the builder, sadly no longer with us, only finished it last year.   A fantastic selection of Loco's on display and also a good number of Traction engines both engines in steam on the parade field, but also a number of static models in side. It appears this year whilst there were still a few suppliers missing, there were a good number of static displays to improve t...
Post a Comment
Read more