Skip to main content

Homemade Boiler or is it.

 Mock Boiler for a Welding task


Hi, progress is heading into a new phase. A mock-up boiler - with thanks to a few members on Facebook for sending me the drawings electronically. 
I have all the drawings apart from the boiler ones possibly because if your expecting to buy the boiler then there is no need to obtain the boiler drawing. (save a few quid). 

     
   
And the concept proven, just need the Gas Axe expert to pop round and show the old man how its done.


Mr 'PUUSH...' !!

This is my homemade shop press that has finally been completed, and the first parts, type C - 5mm keyways successfully cut in the rear hubs.
It has been a long time coming and improvements to my welder, new PPE equipment and a Savage A40 ESAB welding mask have all be acquired to aid the job.  The 2 Ton bottle jack is more than capable of pushing the broach ram trough a cast iron hub of 2" length. The studs welded on are for a potential guard but require the Perspex to finish.



Until next time, stay safe in the workshop, make plenty of swarf, and keep building!
Stephen.
Labels:

Comments

Post a Comment

Popular posts from this blog

1" Minnie Traction Engine By Stephen Meredith   Background Working Progress (Gears) Front End Parts Following the completion of a small marine steam engine "Trojan Engine", I decided to tackle a larger project. Having visited various shows and the model engineers Exhibition, I decided to buy the Construction book for building the popular 1" scale 'Minnie' traction engine. The initial workshop experience was limited but keen to learn, and research has enabled me to get it this far. A s can be seen, this is basically finished well almost, it steams, and runs well a few tweaks are needed but tweaks don’t make piles of swarf. The intention was to show the engine and run it, at rallies but what I really wanted was a capable engine that could pull an adult or (me) on a field. This engine was, therefore, a stepping stone to be able to tackle the engine I wanted. After research, I bought a set of drawings for the Plastow 3” Bur...
Post a Comment
Read more

Midlands Model Engineers Exhibition 2023.

  Midlands Model Engineers Exhibition 2023. This year’s Model Engineers Show 2023 was a huge success! All four days of the show were fantastic with exhibitors and visitors alike enjoying plenty of opportunities to purchase items, learn and explore the very latest in machinery tools and model engineering. The 2 exhibition halls were abuzz with vibrancy, excitement and anticipation. I went with a usual shopping list, and a few parts that I had organised from suppliers to take to the show for me for collection and postage saving opportunity. Centre piece if the show for me, a huge amount of work in this engine and the builder, sadly no longer with us, only finished it last year.   A fantastic selection of Loco's on display and also a good number of Traction engines both engines in steam on the parade field, but also a number of static models in side. It appears this year whilst there were still a few suppliers missing, there were a good number of static displays to improve t...
Post a Comment
Read more

Some BSA Bike messing a-bout's

  Some BSA Bike messing a-bout's Aside from making the traction engine, model railways, ammeter radio, snooker, computing, playing Ukulele in a band and a host of other activities. We have been rust-orating and old bike that belonged to my father. Basically it hadn't run for say 45+ years we bought a few bits sorted a stuck exhaust valve and bingo after some effort it started. The plan it to do my CBT test and A licence so we could take part in next years "Distinguished Gentlemen's Ride". More to follow if this happens but a few picture's of the progress below shows the extent of the restoration.   Until Next month, stay safe, make swarf and be the best you can be!
Post a Comment
Read more