Skip to main content

Manifold Casting

 Manifold Casting...


"This elaborate bracket started as scrap from work, reappropriated and welded into a 30-degree angle clamping jig." You can see from the side view I forgot to even clean the weld up with a brass brush.

First pass with the cutter all looks good, this low setup allows me to drill and tap the holes for the fountain valves and drill the horizontal connecting channel.


Feel free to leave a comment if you have any questions while reading these blog updates—I'm always happy to reply.
Whether you have a suggestion for a future post, a question about something specific, or simply want to say you’ve found the blog interesting, your feedback is always welcome. It helps guide the direction of future content and is genuinely appreciated.

Until next time, stay safe in the workshop, make plenty of swarf, and keep building!
Stephen.

Comments

Popular posts from this blog

Midlands Model Engineer Show 2024 - Warwick

 Midlands Model Engineer Show 2024 - Warwick This year’s Model Engineers Show 2024 was a huge success! All four days of the show were fantastic with exhibitors and visitors alike enjoying plenty of opportunities to purchase items, learn and explore the very latest in machinery tools and model engineering. The 2 exhibition halls were abuzz with vibrancy, excitement and anticipation. I went with a usual shopping list, and a few parts that I had organised from suppliers to take to the show for me for collection and postage saving opportunity. I ordered an expansion Link and had it water jet cut this being the results after only minimal cleaning up required. I reamed the holes out and basically park this until the rods are done. Back to the show report. There were some fantastic models on display and also the gas turbine demonstrations running outside along with the traction engines and a few helicopters in the main carpark. Below the pictures I took on the day and a few videos of the ...
1" Minnie Traction Engine By Stephen Meredith   Background Working Progress (Gears) Front End Parts Following the completion of a small marine steam engine "Trojan Engine", I decided to tackle a larger project. Having visited various shows and the model engineers Exhibition, I decided to buy the Construction book for building the popular 1" scale 'Minnie' traction engine. The initial workshop experience was limited but keen to learn, and research has enabled me to get it this far. A s can be seen, this is basically finished well almost, it steams, and runs well a few tweaks are needed but tweaks don’t make piles of swarf. The intention was to show the engine and run it, at rallies but what I really wanted was a capable engine that could pull an adult or (me) on a field. This engine was, therefore, a stepping stone to be able to tackle the engine I wanted. After research, I bought a set of drawings for the Plastow 3” Bur...

Stoke Prior Steam Rally 2025

 Stoke Prior steam rally 2025 📣 Show Report ✅ Strong Attendance – Rain or Shine! The show, as usual, was well attended, and we’re pleased to report that paying numbers held up strongly —despite a soggy Saturday. Fortunately, Sunday brought sunshine all day , which made up for it! A big thank you to everyone who braved the elements. This year’s weather was a definite improvement on last year’s continuous showers—and a far cry from the scorcher we had the year before that (we still remember those sunburns!). 😎 🚜 715 Exhibits on Display! We were welcome a whopping 715 individual exhibits this year, offering a fantastic variety for visitors to enjoy. This included: 25 Miniatures 7 Full-Size Engines 2 Steam Cars A huge number of commercial vehicles , classic cars , motorbikes , military vehicles , and stationary engine displays From the tiniest model to the largest working machine, there was something for everyone to marvel at.  <---This is us on the Su...